Send Email
Send SMS
Search
Genuine Automation
Genuine Automation


Asset Condition Monitoring Gateways

We are leading supplier Asset Condition Monitoring Gateways. These devices interface with sensors on various types of assets and provide status update on each parameter. The backend software then provides trending and analysis to help user take maintenance call well in time to avoid unscheduled asset breakdown.

Our gateway devices are helping users monitor condition of assets such as Transformers, Furnaces, Boilers and Compressors.

Remote Data Logger Mac-Tel

REQUEST CALLBACK

Remote Data Logger Mac-Tel
Approx. Rs 40,000 / Piece
Get Best Quote
Product Details:
Minimum Order Quantity1 Piece
PortRS285
Serial Flash2 MB
Analog Inputs8(0-5v) or (4-20 mA)
UsageIndustrial

GSM/GPRS Remote Data Logger MAC-TEL is a general purpose intelligent device for acquiring data from Modbus client devices and pushing the same to a server on HTTP Protocol.

Product Description:
The Terminal has an RS485 port to which maximum of 32 Modbus client devices can be connected parallel. The Terminal can be configured to query these client devices and push the data to a centralised server.

Modbus master commands can be configured by giving the details like client ID, function code, start register and end register. A total number of clients, Communication interval, timeout, the number of poll attempts etc also can be configured.

Similarly, Parameters like HTTP URL, GPRS APN, user name and password can also be configured. All these configurations can be done using the configuration software provided. Once the configurations are made the terminal will be ready to use. An active GPRS enable SIM card is to be inserted in the slot provided in the terminal before using the terminal.

Proper GSM antenna also needs to be connected to the terminal. Once configurations made, SIM card inserted, Antenna connected and the terminal is powered on the terminal will works as follows. The terminal will start polling all the configured devices at on the interval specified by the 'Communication Interval'. If the polling is failed the terminal will attempt again and the maximum number of retries will be limited to the 'Number poll Attempts' configured.
The data will be an ASCII string which is exactly same as the data received from the client device on sending the configured command. After this, the terminal will poll the next device and communicate the data to the server.
This process will continue for all the configured devices. It may be noted that the time required to poll one device will depend on following factors:

1) Time Taken to complete polling of device which in turn will depend on poll timeout and number of poll attempts

2) The size of data to be communicated from the device to the server and also on the sized of data communicated from the server to the device on receipt of an HTTP post request.

3) Availabilty and speed of the GPRS connection
Yes! I am Interested

 
X


Call Us: +91-8079451535
Genuine Automation
Damodar Chavan (CEO)
No. 36-37, 2nd Floor, Sai Dham Commercial Center, Landewadi, Bhosari ,
Pune - 411039, Maharashtra, India
Contact via E-mail
Contact via SMS



Home  |   Profile   |  Products & Services  |  Site Map  |   Contact Us   |   Mobile Site

© Genuine Automation. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

Genuine Automation