Digital Energy & Power Meters

VAW DC Multifunction Power Meter provide high accuracy measurement, display and communication of DC voltage, Current, Power, Energy(import / export), and Run Hour. They are also building in 4 Relay outputs, 1 Analogue output, 1 Pulse output , 2 External Control Inputs and 1 RS485(Modbus RTU Mode) interface with versatile functions such as remote I/O, alarm and communication for DC power applications like as solar, wind power system or portable electronic device consumption testing. For the power saving, VAW has built in an innovation timer to switch down the light and power of LED. It makes sense to build the meter in a green power system.

DC Energy Meter model 6001 with RS485 MODBUS port for monitoring 4 channels of DC power system.

Basic Model 6001 with RS485 port
4 Channel Current Input

Input Voltage : 10-60 / 61-200 / 201-1000V DC (Select while ordering)

Accuracy Class : 1
Parameters : VA + kW + kWh + RH + OH + NI + DM 
Communication: RS 485 MODBUS 

• Item Code: EMDC-6001-RS485
• Delivery Time: 4 Weeks

With rich industrial experience we are involved in offering an extensive range of Digi 520 Digital Energy Meter.

• Pay Mode Terms: T/T (Bank Transfer)

The CPM-20 Multifunction Power Meter provide high accuracy measurement, display and communication(Modbus RTU) of all electrical and power quality parameters, including harmonic measurement THD(Total Harmonic distortion) Provides electricity bill ratio (Cost) and CO set can show cumulative electricity bills 2 and carbon emissions, and suitable for the installation in the power management of remote communication, such as the use of demand

DiGi 620 Digital Multifunction Meter with RS485 port, 2 DI ports, Demand & THD measurement.

• Item Code: DiGi-620
• Delivery Time: 2 Weeks

DiGi-620-H provides Harmonics and demand measurements apart from having one RS485 port and two DI ports to implement load management function.

• Item Code: DiGi-620-H

We are offering EPM-07S Multimeter Energy Meter.

We are offering DiGi-250 Digital Energy Meter.

AEM-DD provides high accuracy DC power measurement, display and remote communication of five loops (V, A, P, kWH).   Multi-Loop design and optional relay output makes this a modular expansion design that helps decrease the overall cost and provide installation flexibility.    All monitored data is available via a RS485 serial port for applications in energy management, alarm, and remote controlling.   Embedded flash memory for Data-Logging prevents data loss even when communication is interrupted. Moreover, its ultra-compact size with DIN-rail mounting means this device can be mounted in virtually any panel, enclosure or indoor Cabinet.

• Item Code: AEM-DD
• Delivery Time: 1 Week

We are happy to introduce, factory installed, pre-wired, pre-configured & factory calibrated Energy Meter panels. These are tested for accuracy, quality and aesthetics before shipment. The panels are constructed in a durable & weather-proof panel. User can plug and play the device to specified power point, bringing a whole new set of convenience.

The pre-installed and pre-configured panels are available in your choice of weatherporoof enclosure, shipped with your choice of high quality current transformer & accessories.

 

This includes the fitting of the meter into the panel, all pre-wiring with clearly labelled color-coded terminal blocks and grounding. The solution includes all the recommended and essential accessories like fused voltage inputs and shorting blocks for CTs.

The meter will ship pre-configured to work with your exact electrical configuration with voltage, current, phases, frequency, network/communications settings (where applicable) already setup.

Features:

• Clean Factory wiring.
• Factory configuration removes site programming pains.
• Self-powered panel. Doesn't require auxillary power.
• Necessary accessories and safety components are pre-installed.
• Factory calibrated. We support onsite calibration at user selected frequency for extra cost.

• Item Code: ExSIL8001
• Delivery Time: Ex stock

DiGi-720 with RS485, 2 DO, 3 DI ports, Memory for Data Storage, Maximum Demand measurement & Ethernet port, is a full featured Multifunction Energy Meter with TOD / TOU (Time of Use) tarriff settings and load management using Digital Output ports. This variant comes with RS 485 MODBUS port for remote communication. It also has 2 Digital Outputs & 3 Digital Inputs. It provides 0.5s TRMS accuracy (IEC 62053-22) up to 31st harmonic. Typically used for incomer monitoring at substation levels, this meter provides phase sequence adjustment and data/event recording as an option. 

DiGi-720 measures following parameters;

• Voltage – 3U, 3V, Unbalance
• Current – 3I, In, Unbalance
• Powers – kW, kVA, kVAr – phase wise and total
• PF – phase-wise and total
• Frequency
• kWh, kVArh, kVAh
• Demand & Max Demand – kW, kVA, kVAr, I
• THD – V & I
• Individual harmonics upto 31st order
• Harmonic Energy (1st to 13th)
• Min & Max 1s – V, I, kW, kVAr
• K factor, Crest Factor

Standard Specifications

• True RMS accuracy up to 31st harmonics
• Continuous sampling at 128 samples/cycle
• Phase sequence adjustment for easy installation.
• TOU - 4 tarriff rates, 8 periods, 2 lists of tarriff rates.
• 3 Digital inputs as standard offering.
• Voltage input upto 480V
• 2 DO as standard offering
• RS 485 default offering
• Backlit graphical LCD display
• Built in memory and TOU options.

• Item Code: DiGi-720-RS485-2DO-3DI-64MB-MD-ETH
• Delivery Time: 2-3 Weeks

DiGi-720 with RS485, 2 DO & 3 DI ports, is a full featured Multifunction Energy Meter with load management using Digital Output ports. This variant comes with RS 485 MODBUS port for remote communication. It also has 2 Digital Outputs & 3 Digital Inputs. It provides 0.5s TRMS accuracy (IEC 62053-22) up to 31st harmonic. Typically used for incomer monitoring at substation levels, this meter provides phase sequence adjustment and data/event recording as an option.

DiGi-720 measures following parameters;

• Voltage - 3U, 3V, Unbalance
• Current - 3I, In, Unbalance
• Powers - kW, kVA, kVAr - phase wise and total
• PF - phase-wise and total
• Frequency
• kWh, kVArh, kVAh
• Demand & Max Demand - kW, kVA, kVAr, I
• THD - V & I
• Individual harmonics upto 31st order
• Harmonic Energy (1st to 13th)
• Min & Max 1s - V, I, kW, kVAr
• K factor, Crest Factor

Standard Specifications

• True RMS accuracy up to 31st harmonics
• Continuous sampling at 128 samples/cycle
• Phase sequence adjustment for easy installation.
• TOU - 4 tarriff rates, 8 periods, 2 lists of tarriff rates.
• 3 Digital inputs as standard offering.
• Voltage input upto 480V
• 2 DO as standard offering
• RS 485 default offering
• Backlit graphical LCD display
• Built in memory and TOU options.

• Item Code: DiGi-720-RS485-2DO-3DI
• Delivery Time: 2-3 weeks

PM130EH Plus is 3 phase Power Meter which is configurable to several industry conditions by way of add-on modules. It provides cost effective substitute for several panel meters, saving panel real estate.

• Item Code: 100155
• Delivery Time: 1 Week